Follow

Siemens Gigaset E495 registration procedure

E495Handset.jpg  

Siemens Gigaset E495 registration procedure

 

 

E495base.jpg

1.

On the main phone base (the one connected to the phone socket), press and hold the paging button for 5 seconds. This is the only button on the base.

The base is now in registration mode.

The next steps must be finished within 60 seconds.

E495Navi.jpg

2.

On the handset you want to register, please press the right side of the navigation button, the handset will enter MENU.

E495SettMenu.jpg

3.

By pressing the navigation button up or down, please select "Settings" and confirm by pressing "OK"

E495HandSett.jpg

4.

By pressing the navigation button up or down, please select "Handset" and confirm by pressing "OK"

E495HandsetMenu.jpg

5.

By pressing the navigation button up or down, please select "Register H/Set" and confirm by pressing "OK"

E495PIN.jpg

6.

The handset will now ask for a PIN. Using the phone keypad please enter "0000" and press "OK" to confirm.

 

The phone will now show "Handset is registering" and after a few seconds will return to the main screen. You may now start using your handset.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

0 Comments

Article is closed for comments.
Powered by Zendesk